Fish Feed Extruder Machines-manufacture,factory,supplier from China

Twin Screw Fish Feed ExtruderOn April 5, the twin-screw fish feed extruder purchased by the Indian agent was successfully shipped. So, why do more and more customers choose twin-screw extruders? Let's analyze it.Advantages of twin-screw extruder：The function of the extruder screw is to push the material forward in the screw groove, convert the material from solid to molten, and form shear on it, and supply material to the die of the machine head in a fixed and quantitative manner according to a certain compression ratio.

Common troubleshooting of twin-screw extruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be transported forward. Under the action of thrust, friction, shear force and heat, a high-pressure and high-temperature difference is formed inside and outside the cavity.

Advantages of Puffed Floating Fish Feed1. Easy feeding and management to reduce diseasesExtruded aquatic feed can be suspended on the water surface for a long time. There is no need to set up a special feeding platform when feeding, just feeding at a fixed point. Fish need to float on the water surface when feeding, so they can directly observe the feeding situation of the fish, adjust the feeding amount in time, and understand the growth and health status of the fish in a timely manner.

Using floating fish feed machinery to provide aquatic extruded feed now not handiest saves a lot of time, but additionally improves hard work productivity. floating fish feed machinery can produce distinctive length of fish feed.breeders can calculate the quantity of bait to be fed according to the species, specs, quantity, water temperature and feeding rate of the fish to be farmed, and feed them quick, which no longer best saves plenty of time, however additionally improves labor productiveness.Floating fish feed machinery has wide software potentialities.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material

Current Feed Industry TrendsFeed refers to feedable substances that can provide nutrients needed by animals, promote animal growth, production and health, and are safe and effective when used appropriately. According to product variety, feed can be divided into pig feed, egg poultry feed, meat poultry feed, ruminant feed, aquatic feed, pet feed and other feed.       Since the industrialization of feed, global feed production has entered a new stage, and global feed production has continued to rise.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

                                             Fish Feed and Pet Food Production LineTo provide the best service, manufacture better machines, and expand the most suitable production scale, we are in action!With the improvement of various services, our company has received more and more orders for pet food and fish feed production lines.

Abalone feed production line installationIn 2022, a Korean customer purchased a 1.5-2 ton abalone feed production line. Now the production line has been put into use. The returned 2-ton abalone feed production line has also arrived at the customer's factory, and the new production line is being installed and debugged.