corn puff making extruder-manufacture,factory,supplier from China

How to Improve the Puffing Degree of Corn Puff SnackIn the production process of puffed food, uneven product discharging and spraying often occur, which affects the degree and effect of puffing. Today we will share with you some troubleshooting methods.1 Control of Puff Twin-Screw ExtruderDifferent puffing extruder machine equipment vary in the degree of puffing. Generally speaking, puffing equipment can control the time, temperature and pressure of raw materials under heating and pressurization conditions, thereby affecting the puffing degree of raw materials.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

The breakfast cereal production line uses advanced puffing technology to instantly puff various cereal raw materials into crispy and nutritious breakfast cereals after high temperature and high pressure treatment. The entire production line consists of ingredients, mixing, puffing, drying, seasoning, cooling, packaging and other links. It has a high degree of automation and fast production efficiency.1 Ingredients: The ingredients of corn flakes are very important.

Wheat Bran Puffing Snack Making MachineWheat bran, a by-product of wheat flour processing, is yellow, flaky or powdery. There is part of the germ (that is, the part where the wheat sprouts) at the end of the wheat hull, accounting for about 5-10% of the total wheat hull. About 1/3-1/2 of the wheat hull has gone into the flour. The total wheat hull is Divided into 6 layers, the outer 5 layers contain more crude fiber, less nutrients, and are difficult to digest. Wheat hulls contain large amounts of B vitamins.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

Daily Troubleshooting of Twin-screw ExtruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be transported forward. Under the action of thrust, friction, shear force and heat, a high-pressure and high-temperature difference is formed inside and outside the cavity.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material

Breakfast cereal production line adopts advanced puffing technology, all kinds of cereal raw materials after high temperature and high pressure treatment, instant puffing into crisp, nutritious breakfast cereal.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

Common troubleshooting of twin-screw extruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be transported forward. Under the action of thrust, friction, shear force and heat, a high-pressure and high-temperature difference is formed inside and outside the cavity.